LOCTITE EF 9899CF 100M AERO
Product Info
LOCTITE EF 9899CF AERO is a medium density low exotherm expanding syntactic film suitable for core filling applications. The typical cured density range for LOCTITE 9899CF AERO is 18 – 35 pcf (0.29 – 0.56 g/cc). The low exotherm chemistry makes this product ideal for deep core fill. High compressive strength provides the potential for some structural applications.
FEATURES
- Unique Closed Cell Expanding Film Technology
- Capable of Expanding Over 300%
- Homogeneous Cell Structure
- Co-curable
- 250°F to 350°F (121°C to 177°C) Cure
- Density/Strength May Be Tailored to Meet Specific Design Needs
- Supplied as a 1’ x 2’ (0.30 m x 0.61 m) Sheet of Controlled Areal Weight and Thickness
- Wide Processing Window
Applications
- Core Stabilization
- Edge Close Out
- RTM Core Applications
- Filling Core in Closed Mold Operations
- Stiffening of Composite Structure
- Low Exotherm for Deep Core Fill
Handling
This product is supplied in 1’ x 2’ (0.30 m x 0.61 m) sheets in a thickness of approximately 100 mils/2.5 mm and 50 mils/1.25 mm or in roll stock 18 inches wide by 25 lineal feet (45.7 centimeters wide by 7.6 lineal meters), and is ready to use as received. Material should be removed from cold storage and allowed to warm to room temperature before removing the protective packaging. This material has protective liners on it, which must be removed prior to part assembly. The liners will always be a contrasting color from the material to allow the user easy confirmation of removal.
Application
Storage – LOCTITE EF 9899CF AERO requires refrigerated storage. Store 0°F/-18°C or below for maximum storage life. Shelf life 0°F/-18°C or below is 12 months. Store in sealed bag. Allow adequate time for the container to warm to room temperature before opening for use. Ambient temperature shipment of samples will be sufficient for durations of less than 7 days.
Applying – LOCTITE EF 9899CF AERO is a pliable film with tack and drape. It can be cut to any desired shape using ordinary razor knives or scissors. Razor knives using templates as guides work best. After cutting the material, the user can remove the product liners by peeling them back from a corner.
View Accessories
