ERA POLYMERS ER1K801AFG
Item #:
ER1K801AFG
Product Info
ER1K80AFG
ERA POLYMERS
ERAPOL 1K 801A 5-GALLON 44#
80 Shore A Hardness
The Erapol 1K Blocked Series are a range of single component blocked TDI polyester polyurethanes available in a range of hardnesses. To process, simply heat, pour, and cure. The Erapol 1K Blocked Series are low free TDI and do not contain Methylenedianiline (MDA). Air entrapment is a common problem when manufacturing rollers. This can be solved by using the Erapol 1K Blocked Series as they undergo a low viscosity phase early in the cure cycle. During this stage any air bubbles self release,
resulting in bubble free castings.
Advantages of Erapol 1K Blocked Series over conventional elastomers:
- Easy & Efficient processing
- Stable at room temperature
- Single component
- Economical – Minimal wastage due to no mixing or weighing
- No need to add curative
- Cures with heat
- No dispensing equipment required
- Self Degassing – Air bubbles self release in curing process so there is no need for vacuum degassing
The Erapol 1K Blocked Series is ideally suited for the following applications:
- ANTI VIBRATION MOUNTINGS
- GASKETS
- PRINTING ROLLERS
- ROLLERS
- SEALS
This item requires special handling. Additional shipping surcharges may apply.