AC801 is a single component, clear acrylic conformal coating which meets IPC-CC-830 as well as a U.L. Yellow Card

The coating is sprayed brush-applied and dip-applied, and air dries tack-free to provide a tough environmental coating. The material provides protection of print circuit boards, electronic components, thick-film circuits  and  other  substrates.  It  contains fluorescent indicator and is easy to repair.

TYPICAL APPLICATIONS

Protective coating of electronics and circuits.

Resists moisture, water, corrosive gas, chemicals.

 

UNCURED PROPERTIES

Chemical type…………….……modified acrylic resin
Color……….…………….………………….…..… clear
Viscosity (cps @ 25℃) (GB/T2794)………………30
Specific gravity (@ 23℃GB/T 15223) .…0.84
Tack-free time (mins/80um) …….…..……….. 10

 

CURED PROPERTIES
Elongation(%) (GB/T6344-1996) ………..……20
Shore hardness (shore A) ………………….……60
Film thickness(μm) …………………………… 25-100
Volume resistivity(ohm-cm@25℃)……… ….. 3×10 15
Dielectric constant(1MHz) ……………..…..………3
Dielectric strength (KV/mm) …….……………….. 50
* Sample tested at 23 ±2 ℃, 50 ±5%RH